Full 360 Degree Turntable
with electrical connection for Doll House

Baltic Birch 18” x 24”

    This entire unit is made with premium parts and materials.  The Lazy Susan ball bearing slip ring is precision made.  It is approximately 12 inches in diameter and will hold 330 pounds of weight.  More than enough to support your dollhouse.  What allows  the table to spin 360 degrees and still allow for full electrical supply to the doll house is the little Mercotac slip ring.  This small electrical swivel uses mercury to conduct the electrical current through the center of the table.  This swivel is rated for
4 amps and thus is perfect to handle all of the lights in your dollhouse. 

The table measures 18 by 24 inches but is sufficient to support most dollhouses and still allow for a full 360 degree rotation.   Although the picture shows the table with 4 inch legs, they can easily be removed and the lazy Susan can be placed directly on any flat surface.

18” x 24” Turntable
$ 145.00

Note: Price shows $165.00 on checkout to reflect additional amount for shipping

     This is the first 18” x 24” table I made.  It is very similar to the above unit but has rounded legs and a molded edge.  The above unit was simplified and looks more modern.  All tables come with an electrical power supply (2 amp. DC) and CR2S’s power connection and is ready to connect to any dollhouse or display.

     This Library table is made of solid Aspin hardwood, but could be made of any hardwood..  This table is 36 x 24 inches with a 20 inch Lazy Susan slip ring.  the table swivels a full 360 degrees and has a roller ball stop at 0 and 180 degrees.  It too provides a constant 12 volts to your dollhouse or display.  This Library table is finished in a dark walnut stain and three coats of a polyurethane.  Because of its construction, it is not able to be disassembled for easy shipping.  It does allow for the possibility of a drawer being made for storage.
     CR2S can design and make a custom table for you.  Call for information:  317-414-3921 or E-mail with your preferences and I will try and give you a quote.
 

36” x 24” Turntable
$ 365.00

     I have been making larger custom hard wood tables for Jimmy Landers store fronts.  The picture shows a solid cherry table 38” x 32”.  The legs are removable and can be most any length.  The picture shows 7” short legs for display purposes but they come with full 27” tapered legs.  If we would have a nice sunny day, I could get out and take some good pictures of these new tables.  I have made two of solid Cherry, One of Sassafras and am starting one of Oak.  These tables can all be seen at the Tom Bishop Miniature Show this April 19th through the 22nd in Chicago.  Check out Jimmy Landers “1900 Series” store fronts on this website and again at Tom Bishops show.  If you are interested in a quote for a table, contact Carl R. Sahlberg at Creative Reproductions 2 Scale.

E-male for Custom Turntable
starting at $145.00